How Much Electricity Does a 1.5-Ton AC Actually Use Per Day?
Explore another Lumtrek guide.
How to Estimate Ceiling Fan Electricity Cost
Use wattage, hours and tariff to estimate the cost of running a ceiling fan.
Use this guide well
- Start with the assumptions used in the example.
- Replace example numbers with your own data where applicable.
- Use the checklist before making an important change or purchase.
Before you use the example
Home and energy figures are sensitive to real usage. Treat the example as a method, then swap in your own tariff, hours, room conditions or appliance details.
What this page is trying to do
The most useful result is usually not a single number. It is knowing which variables matter enough to measure or verify at home.
Lumtrek approach: Start with the simplest useful calculation or decision rule, then check the assumptions that can change the result.
The core formula
For an appliance with a relatively stable electrical load, the basic estimate is simple: energy in kWh equals power in kW multiplied by hours of use. A 60 W fan used for 10 hours is 0.06 × 10 = 0.6 kWh.
A monthly example
| Input | Example |
|---|---|
| Fan power | 60 W |
| Daily use | 10 hours |
| Daily energy | 0.6 kWh |
| 30-day energy | 18 kWh |
| Rate | ₹8/kWh |
| Estimated monthly cost | ₹144 |
A practical worksheet for your situation
Use these prompts with the information you actually have. They are designed to turn a general explanation into a decision you can reproduce, check and revisit.
Record the rated wattage
Use the model label or manufacturer documentation for the fan you actually own.
Estimate daily hours
Write down an ordinary day rather than the longest possible use.
Use the correct tariff
Use the rate that actually applies to your connection and billing period.
Check speed settings
If the fan has materially different power draw at different settings, treat that as part of the estimate.
Before you rely on the answer
Check the exact version, model, date, price, tariff, policy or rule that applies to you. This page explains a method; it does not replace the current terms supplied by a manufacturer, service provider or public authority.
Further reading and verification
These official sources are useful starting points for checking current rules, documentation or standards related to this topic.
- Bureau of Energy Efficiency (India) — Indian energy-efficiency information and standards
- U.S. Department of Energy – Energy Saver — General household energy guidance
- National Consumer Helpline (India) — Consumer rights and complaint guidance
Final takeaway
Use wattage, hours and tariff to estimate the cost of running a ceiling fan. The most useful approach is to use the numbers and context you actually have, check the important assumptions, and avoid treating a single headline figure as universal.
Fan cost estimates should use real running hours
A ceiling fan’s rated power is a useful starting input, but speed settings and actual use determine daily energy consumption. For a straightforward household estimate, measure or use the appropriate rated input, record hours of operation and apply the tariff from your own bill.
- Check the wattage for the exact fan or regulator setting.
- Record typical hours per day rather than assuming all-day operation.
- Use the same tariff basis when comparing fans.
- Compare comfort and airflow as well as electricity use.
Two fans with similar power numbers can still feel very different in a room. A useful comparison therefore considers both energy use and the airflow you actually need.
Before you make a decision
Use the points below as a quick check. They are deliberately specific to this subject rather than a universal checklist.
What would change your conclusion about “How to Estimate Ceiling Fan Electricity Cost” if one important assumption turned out to be wrong?